PHILIPS – SPD8010CC(?)の非公式ファーム

なんとなく「やっちまった」感もありますが。

基板を見ると

「88FB-LKJ1」なんてチップが。MARVELLご謹製のARMなSoCのようです。

# なんだかいやな思い出が(汗)＞MARVELL。

「Buffalo NAS-Central Forums」の「Firmware for LS-LGL series」でも「88FB-LKJ1」なんて単語が出てくるので、LS-LGLにも載っているんですかね。

グーグル先生に聞いてみたら、「fvdw」というハンドルをお使いの方が非公式ファームをリリースされているようで、少し古いですが氏のSkyDriveから入手する事が出来ます。

ここから入手できる一番新しい非公式ファームは「fvdw7-0-s-5mar2011.bin」なので、これを取得してSPD80xxに適用すればOK。

適用するとファームが「1.2.9.fw fvdw 7.0」となります。

sshなんかも使えて便利（個人メモ：rootの初期パスワードはgiveit2me）なのですが、ファイルの転送速度が書き込み3.6MB/Sec、読み込み5.0MB/Secとがっかりな訳ですよ。

なので、最新版を「plugout.net」から入手。（※要ユーザ登録。フリーメールアドレス不可。）

現時点で最新版と思われる「xfvdw-sl-12-1-phn-4jun2012.zip」を入手して適用してみましたが、書き込みが6.5MB/Sec（読み込み速度は未計測）となっています。

…

非公式ファームは純正ファームに比べて機能てんこもり状態になってますね。でも、元々非力なARM SoCですからね。あんまり期待するのも酷かなとも思いますけれど(笑)。

sshでログインしてtopした結果

Tasks: 46 total, 1 running, 45 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.3%us, 23.5%sy, 0.0%ni, 72.3%id, 0.4%wa, 0.0%hi, 3.5%si, 0.0%st
Mem: 12464k total, 11480k used, 984k free, 488k buffers
Swap: 257032k total, 4252k used, 252780k free, 3800k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1060 root 20 0 2112 944 748 R 7.2 7.6 0:00.13 top
145 root 20 0 0 0 0 S 1.8 0.0 0:04.12 kswapd0
1 root 20 0 2976 28 28 S 0.0 0.2 0:00.74 init
2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0.0 0.0 41:14.80 ksoftirqd/0
4 root 20 0 0 0 0 S 0.0 0.0 0:00.22 events/0
5 root 20 0 0 0 0 S 0.0 0.0 0:00.04 khelper
8 root 20 0 0 0 0 S 0.0 0.0 0:00.00 async/mgr
101 root 20 0 0 0 0 S 0.0 0.0 0:00.19 sync_supers
103 root 20 0 0 0 0 S 0.0 0.0 0:16.42 bdi-default
104 root 20 0 0 0 0 S 0.0 0.0 0:01.59 kblockd/0
109 root 20 0 0 0 0 S 0.0 0.0 0:00.02 ata/0
110 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ata_aux
114 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ksuspend_usbd
119 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khubd
138 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rpciod/0
146 root 20 0 0 0 0 S 0.0 0.0 0:00.00 aio/0
147 root 20 0 0 0 0 S 0.0 0.0 0:00.00 nfsiod
213 root 20 0 0 0 0 S 0.0 0.0 0:00.02 scsi_eh_0
218 root 20 0 0 0 0 S 0.0 0.0 0:00.00 mtdblockd
278 root 20 0 0 0 0 S 0.0 0.0 0:00.00 usbhid_resumer
296 root 20 0 0 0 0 S 0.0 0.0 0:00.04 kjournald
305 root 20 0 1308 4 4 S 0.0 0.0 0:00.00 buttons-spd
307 root 20 0 1352 40 28 S 0.0 0.3 0:00.04 fan-spd
321 root 20 0 0 0 0 S 0.0 0.0 0:00.06 kjournald
357 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kslowd000
358 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kslowd001
489 root 20 0 1492 252 204 S 0.0 2.0 0:05.49 noflushd
492 root 20 0 0 0 0 S 0.0 0.0 0:00.22 kjournald
508 root 16 -4 1496 16 16 S 0.0 0.1 0:00.01 udevd
515 root 20 0 12640 128 72 S 0.0 1.0 0:07.68 httpd
530 _ntp 20 0 2704 264 204 S 0.0 2.1 0:00.21 ntpd
531 root 20 0 2704 48 28 S 0.0 0.4 0:00.12 ntpd
602 root 16 -4 1440 44 32 S 0.0 0.4 0:02.67 syncawayd
617 1 20 0 1448 20 20 S 0.0 0.2 0:00.00 portmap
641 root 20 0 2036 32 32 S 0.0 0.3 0:00.01 dropbear
664 root 20 0 1484 36 36 S 0.0 0.3 0:00.02 hostd
714 root 20 0 3660 528 396 S 0.0 4.2 0:01.18 nmbd
716 root 20 0 6192 32 32 S 0.0 0.3 0:00.39 smbd
720 root 20 0 6192 16 16 S 0.0 0.1 0:00.00 smbd
721 root 20 0 2980 28 28 S 0.0 0.2 0:00.02 sh
833 root 20 0 2108 196 152 S 0.0 1.6 0:07.73 dropbear
834 root 20 0 4136 304 244 S 0.0 2.4 0:00.17 sh
951 root 20 0 0 0 0 S 0.0 0.0 0:00.31 flush-8:0
957 nobody 20 0 12924 2996 1592 S 0.0 24.0 0:02.54 httpd
1053 nobody 20 0 12836 3196 1776 S 0.0 25.6 0:02.18 httpd

かわいそうに(笑)。

同じくdmesgの結果。

Linux version 2.6.33.1 (root@linux-fw1) (gcc version 4.2.0 20070413 (prerelease) (CodeSourcery Sourcery G++ Lite 2007q1-21)) #47 PREEMPT Sat May 15 22:43:07 CEST 2010
CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177
CPU: VIVT data cache, VIVT instruction cache
Machine: Philips NAS SPD8020 CC
Clearing invalid memory bank 0KB@0x00000000
Clearing invalid memory bank 0KB@0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x41000403
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 4096
free_area_init_node: node 0, pgdat c03b8d78, node_mem_map c03d0000
  Normal zone: 48 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 4048 pages, LIFO batch:0
Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 4048
Kernel command line: console=ttyS0,115200 devicetype=SPD8020 serial=AS110843010484 temp=45,50 root=/dev/sda2 ro
PID hash table entries: 64 (order: -4, 256 bytes)
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 8MB 8MB = 16MB total
Memory: 12340KB available (3536K code, 203K data, 124K init, 0K highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:64
Calibrating delay loop... 218.72 BogoMIPS (lpj=1093632)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Orion ID: MV88F6082-Rev-A1. TCLK=133333333.
bio: create slab  at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource orion_clocksource
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 32
NetWinder Floating Point Emulator V0.97 (double precision)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
msgmni has been set to 24
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
console [ttyS0] enabled
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 1
scsi0 : sata_mv
ata1: SATA max UDMA/133 irq 29
physmap platform flash device: 00040000 at f8100000
physmap-flash physmap-flash.0: map_probe failed
MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
net eth0: port 0 with MAC address 00:90:3e:7e:ce:3d
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
input: gpio-keys as /class/input/input0
i2c /dev entries driver
rtc-ds1307 0-0068: rtc core: registered ds1338 as rtc0
rtc-ds1307 0-0068: 56 bytes nvram
Registered led device: power:blue
Registered led device: sata0:blue
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: not present
rtc-ds1307 0-0068: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: HPA detected: current 2930275055, native 2930277168
ata1.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
ata1.00: 2930275055 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST31500341AS     CC1H PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 2930275055 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT3-fs (sda2): recovery required on readonly filesystem
EXT3-fs (sda2): write access will be enabled during recovery
EXT3-fs (sda2): orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 946
EXT3-fs (sda2): 1 orphan inode deleted
EXT3-fs (sda2): recovery complete
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda2): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
Freeing init memory: 124K
EXT3-fs (sda2): using internal journal
EXT3-fs (sda5): warning: checktime reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda5): using internal journal
EXT3-fs (sda5): recovery complete
EXT3-fs (sda5): mounted filesystem with ordered data mode
Adding 257032k swap on /dev/sda3.  Priority:-1 extents:1 across:257032k
Slow work thread pool: Starting up
Slow work thread pool: Ready
NTFS driver 2.1.29 [Flags: R/W MODULE].
fuse init (API version 7.13)
usbcore: registered new interface driver usblp
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda6): using internal journal
EXT3-fs (sda6): recovery complete
EXT3-fs (sda6): mounted filesystem with ordered data mode
eth0: link up, 1000 Mb/s, full duplex, flow control disabled

[adrotate banner=”1″]